——
GroupInternal circuit continuity monitoring system
1. The instrument shall meet the requirements of TC200 thermal cycle and internal circuit continuity monitoring of HF10 wet-freeze test assembly in IEC 61215-2 HF10 standard.
2. DC constant current source: 10 sets
Brand: Bolong customization
Voltage / current: 100V/30A
Computer communication: including data interface, communicate with computer and realize automatic adjustment of current by computer.
3.TC200 current switching function:
① option: TC100 performs IEC61215:2005 (GB/T 9535-1998) to switch current at 25 °C. Large current above 25 °C, automatic switching to low current below 25 °C.
② TC100 executes IEC61215-2IEC61215 2021 to automatically switch the current according to the following procedure (red line below):
In the thermal cycle test, a continuous Isc current is set to flow through the module in the heating section from-40 °C to 80 °C.
The continuous current of cooling section,-40 °C holding section and above 80 °C is reduced to no more than 1.0% of the peak power of STC to measure continuity.
③ HF10 wet freeze test: set continuous, not more than 0.5% STC peak power current flow through the assembly.
Note: the switching function can be turned off during the HF10 test, and the whole test process is the set value.
4. Software data storage and export function:
Display of real-time current and temperature working curve
Monitor, analyze and display the multi-channel current and temperature, and save the collected data in EXCEL format to the database.
GroupInternal circuit continuity monitoring system
1. The instrument shall meet the requirements of TC200 thermal cycle and internal circuit continuity monitoring of HF10 wet-freeze test assembly in IEC 61215-2 HF10 standard.
2. DC constant current source: 10 sets
Brand: Bolong customization
Voltage / current: 100V/30A
Computer communication: including data interface, communicate with computer and realize automatic adjustment of current by computer.
3.TC200 current switching function:
① option: TC100 performs IEC61215:2005 (GB/T 9535-1998) to switch current at 25 °C. Large current above 25 °C, automatic switching to low current below 25 °C.
② TC100 executes IEC61215-2IEC61215 2021 to automatically switch the current according to the following procedure (red line below):
In the thermal cycle test, a continuous Isc current is set to flow through the module in the heating section from-40 °C to 80 °C.
The continuous current of cooling section,-40 °C holding section and above 80 °C is reduced to no more than 1.0% of the peak power of STC to measure continuity.
③ HF10 wet freeze test: set continuous, not more than 0.5% STC peak power current flow through the assembly.
Note: the switching function can be turned off during the HF10 test, and the whole test process is the set value.
4. Software data storage and export function:
Display of real-time current and temperature working curve
Monitor, analyze and display the multi-channel current and temperature, and save the collected data in EXCEL format to the database.
